Beiträge von lostboy86

There are many android full watch. Kospet, Lemfo Lem, etc.

This watch can run android full, with a custom gui (like a gui of wearos), option to square mod, etc.
So many user of androidaps use like this with aps on board of watch and control all from watch. Great news for provide link above if works!

Zitat von jka

If it runs Android or WearOS, you can follow the instructions I linked to. But who wants to run the Android phone version on a watch? When it runs WearOS you can better let Juggluco create the connection automatically.

Zitat von jka

https://www.juggluco.nl/Juggluco/mirror/index.html

I undestand the mirror, but this is a smartwatch with android full 11, same of the smartphone.

But don't have nfc, can't start the sensor.
Many of people want to have the watch android 11 full, not WearOS, act like a master, same of normal smartphone.

The request is :

- start with nfc a sensor with juggluco on normal smartphone
- after 60 mins, the sensor provide a value and juggluco smartphone show the value.
- transfer this file of pair device on android 11 juggluco smartphone-like app on watch.
- nomore use the smartphone at point 1 for diabhetes.
- watch android 11 act like a master and show the value, send the value to aps on same watch, control omnipod etc.

Attach under this message an example with lemfo lem14, android full smartwatch with sim etc, running aaps, xdrip, juggluco etc, BUT don't have nfc, can't start the sensor or take control the sensor with nfc scanning

Good Holydays jka.

I have a question for your great app : its possible to transfer manually the control of sensor, from a juggluco phone master, to another juggluco phone master, without scan the sensor?

Explain well :

start l3 with juggluco phone and pair, show value correctly.

THEN transfer the pair setup on watch full android 11 (for example LEMFO LEM16, don't have nfc), with juggluco phone installed.
I see many people on androidaps groups had this type of watch, can run androidaps standalone like a phone etc.

But anyone have juggluco like me, ask the question above, without a clear reply.

Thanks a lot for the support and hard improvements!

Another sensor error and gone.

Maybe there is something with Juggluco authIn, jka ?

Like others users, the sensor not work after warmup.

I also check into Libreview, and for some istant i see "WrongInAuthToken" or something like this.

I also try 2 different setup :

start sensor with juggluco 6.1.6 on Jelly2 Android 12
take control after 60 min, no value, no streaming, sensor error.

wake up my Oppo Find X2 Pro android 13, with my Samsung Watch5, try to take control, no streaming, sensor error.

Try everything :

terminate sensor, rescan, deselect or select on tab Sensor "Android" voice, resend data on Libreview tab, nothing.
Shut down oppo find x2 pro and watch5, with Jelly2 try to scan the sensor on official app (juggluco stopped and no permission for bluetooth devices), found the sensor like juggluco, Sensor Error.

4013, 4023, and 1 minutes after, 373 P.

Now i start another sensor only with official app Librelink 3 on Jelly2, everything others devices off, and after 60minutes, take control with juggluco on the other phone.

Previous the 6.1.6 no problem for 1 year with sensor activation.

I don't say Juggluco its the cause, maybe something related with new update of Libreview, or maybe only some sensor not work, but from aug22, only this month five sensor in the last three weeks, with many lot and sn.

Zitat von jka

365: Sostituire sensore

Il tuo sensore non funziona. Rimuovilo e avviane un altro.

All four sensors like this. Error 366 or 365. Obv battery dead, sensors not have problems.

Very dangeours this SN and LOT, i solved because i'm help a triahtlon guy, lives at 25 minutes from me, he give me a sensor and this sensor works normally.

My god, if i'm on holiday at 4000km from my home, with 2 sensors backup, and all gone for this problem, i'm dead man walking.

JKA, can you explain more the Spy View options? It's necessary for Libre 3? and Stream History? THanks for the moral support in this situation guys, feels very bad.

Also, Bjr , do you solved your similar problem? You have a backup sensor?

Yes but after 20 minutes not value, i unistall juggluco, install librelink 3 app, and the error log says 366 or 365 for each sensor.

It means faulty sensor

4rth sensor faulty, i advice ALL people :

IF you had a sensor LOT : T60001089 (maybe all entire LOT group), SN start with 0F27 (maybe all entire SN group), it's faulty

At now, the third sensor with original app shows error code 373, F.

I end my sensor, crazy situation.

I'm buy 4 sensor, 3 of them faulty, streaming not enable.

I'm desperate

Libreview Juggluco says "reason=wrongDeviceInToken"

Strange, at now, another sensor in a row with no streaming value, third faulty? Very strange *_

Thanks, this is the second sensor, its faulty, code 366 with Original Librelink 3.

jka what is the error "Streaming not enabled", Info CHAR_PATCH_CONTROL, Connection ok , Handshake ok, but no value?

Zitat von lostboy86

jka do you think in the future Juggluco can , in the future, implement the follower mode?

For clarify : download the value from libreview or nightscout, and show (this is for followers) and implement this also on wear version.

Juggluco at now can upload on nightscout and libreview correctly and work great, can share value from mirrored juggluco on the same network or with different network and a tablet with fixed ip at home.

Thanks for the hard work Jka

Alles anzeigen

jka do you think its an interesting thing to implement? Thanks

jka do you think in the future Juggluco can , in the future, implement the follower mode?

For clarify : download the value from libreview or nightscout, and show (this is for followers) and implement this also on wear version.

Juggluco at now can upload on nightscout and libreview correctly and work great, can share value from mirrored juggluco on the same network or with different network and a tablet with fixed ip at home.

Thanks for the hard work Jka

Juggluco can't work on follower mode, like you app.

Juggluco can send on nightscout, libreview, mirrored juggluco (on the same network) but not send to another phone on separated network (for example, you and your son with a 4g sim outside on the world, two smartphone).

Your app work on Android 8 (the others apps not install).

Zitat von nechoj

Ich verwende die App selber nicht mehr, da ich dafür dank Juggluco keinen Bedarf mehr sehe. Daher ist diese neue Version nur rudimentär getestet: https://mega.nz/file/A1sXRbaB#…S7KfCLPoqS66aoE6u39MCqc74

Zitat von Kappa

[attach='21189','none','true'] [/allega] Informazion

Not work on Android 8

Zitat von Tiger1982

Oh. Then I misunderstood. Where do I find LinkUp Connect?

Releases · cmtjk/LinkUpConnect (github.com)

Maybe you misunderstood his message.

LinkupConnect its another app and its updated yesterday and works.

LLU Client not work.

LIbreLinkUp its the official follower Abbott app.

Libreview its the online service for follower Abbot, report data, share data, etc.

Unfortunately on my mother phone with Android 8 i can't install LinkUp Connect.
LLU Client was the only app i can install and work, but at now there is no update for work with latest libreview update.

Zitat von pachi81

Libre 3 and I switch from phone to watch using the settings inside Juggluco. If the phone receives the values, all works like expected, even the data exchange with the watch.

Inoltre, non è un problema tornare dall'usura al telefono.Fio

If you wait ten minutes, wear and sensor work?