Beiträge von lostboy86

Nightmare last three days. First from the patched app it didn't send data to libreview, then then put the sending from juggluco to libreview, then sensor not scannable by juggluco. Second sensor, juggluco connected but if I walk away it won't reconnect or crash, then installed Diabox. After 2 days, sensor cannot be scanned.

For me, something is wrong with the nfc scan or the bluetooth connection between juggluco and direct sensor, or between diabox and direct sensor. Also the nfc scan is difficult, while with patched or original app, it works fast and wonderful.

This is the real reason why I still installed the patched app and I prefer to use that as primary source instead of direct jugglco, because in my case jugglco either has difficulty reconnecting to the sensor, or as a diabox, it makes the sensor suddenly unusable .
With this of course I don't want to criticize jka's immense work, but at the moment I'm out of luck.

To answer the user above, Juggluco sends, in my case, data on Libreview NOT every 1 minute like the original app, but every 15-20 minutes, making LinkUpConnect or LibreLinkUp unusable on follower phone.

Thanks as always to JKA for being available and continuing to fix the application's bugs

Zitat von jka

Zum ersten Mal seit November habe ich wieder einen Freestyle Libre 3 Sensor und ich habe jetzt NFC-Schwierigkeiten, die ich früher nicht hatte. Mit der gepatchten Libre3-App konnte ich den Sensor zweimal scannen, aber danach reagierte er nicht mehr. Auch das Löschen der Daten oder die Verwendung eines anderen Telefons hat keinen Unterschied gemacht. Auch das Scannen mit der ungepatchten 3.4.0 gibt kein Ergebnis oder Fehlermeldung.

Das Scannen alter Freestyle Libre 3-Sensoren mit der gepatchten Libre3-App hat zu einem „Sensor ersetzen“-Fehler geführt, auch das Scannen des Freestyle Libre 2-Sensors mit der gepatchten Libre3-App gab eine Fehlermeldung (inkompatibler Sensor).

Den neuen Sensor konnte ich auch noch mit Juggluco scannen.

Das Scannen des Sensors ergab dieselbe Firmware-Version wie zuvor.

Alles anzeigen

Same problem for me with a sensor.

I activated with l3 app patched app, then take control with juggluco.

For me, if i go far and return back to smartphone, app l3 can reconnect very fast, juggluco not, i must kill juggluco, reopen, etc.

This is the thing for because i use the l3 app modded.

The situation of this sensor was like this post of JKA : RE: Libre3-2-Juggluco

BUT my biggest problem was L3app and Juggluco sends to Libreview, then i have an yellow warning on the section Connected Apps on L3app modded, and it doesnt work anymore, i'm desperate.

At now i have l3 app modded connect to a new sensor, share data with juggluco and juggluco upload to libreview data for my doctor.

I can't takeover the yellow warning symbol on the Connected Apps section of l3 modded app, and it can't send value to Libreview, if i deactivate the option on Juggluco.

Yes i have activated with l3 app patched app, then take control with juggluco.

For me, if i go far and return back to smartphone, app l3 can reconnect very fast, juggluco not.

This is the thing for because i use the l3 app modded.

The situation of this sensor was like this post of JKA : RE: Libre3-2-Juggluco

BUT my biggest problem was L3app and Juggluco sends to Libreview, then i have an yellow warning on the section Connected Apps on L3app modded, and it doesnt work anymore, i'm desperate.

At now i have l3 app modded connect to a new sensor, share data with juggluco and juggluco upload to libreview data for my doctor.

I can't takeover the yellow warning symbol on the Connected Apps section of l3 modded app, and it can't send value to Libreview, if i deactivate the option on Juggluco

Lol if you wanna laugh....I flash stock android 10 rom on jelly2, then yaosp android 13 and the phone work amazing. Miband watcfaces loading just 1 second.

BUT....:D....there is no modded l3app for juggluco for work to a13.

Then, i try to take control of sensor with only juggluco, direct over ble, and nothing, it scans, add data expiration to calendar, no value.

Then, try to take control of sensor with latest modded app, scan sensor, wait, and nothing., only "Signal Lost"

I think for suicide this evening

I found the problem.

For my trekking safe etc, i don't want to waste battery for this shit of sensors.

Then, i buy an Jelly2 miniphone android 11, it works great, battery two days with juggluco, xdrip, wearos juggluco one minutes , BUT it required around 20-40 sec to upload watchfaces to a MiBand with watchdrip+, and because of libre3 one minutes value, it happens every 60 seconds : this cause an big amount of drain with miband and Jelly2 phone.

If i install on my primary phone Oppo Find X2 Pro juggluco mirroring, xdrip data from juggluco, watchdrip+ data from xdrip and send the watchfaces to MiBand, it works very well, just 2-4 seconds and no drain battery on MiBand.

BUT lol i'm, buy the secondary phone in my bag, controlled by wearos device, for NOT have drain battery on trekking safe phone.

I'm very sad, but i found the problem and i not have a solution at now.

THanks at all and sorry for disturb everybody

I try today with a new miband 6 nfc, all works but every one minutes entire watchfaces from watchdrip uploaded to miband with libre3, juggluco, xdrip latest nightly one-minutes ready build, and WatchDrip version 0.13

Every 60 seconds on miband you must wait 10-20 seconds and you had the value updated.
In this mode is not more comfortable, instead wearOS can update only the value of blood glucose unfortuntately.

Yes for l2 Is ok 5 Min, for l3 Is great during BG fast fall 1 Min updates. Thanks for the clarifg, i try to buy miband 6 and see if shows value same juggluco.

Thanks a lot and goog morning

Just for clarify :

- only xdrip latest nightly support libre 3, only because implement the 1 minute readings
- before that nightly, xdrip for everyone had libre3 was totally not usable for the wrong value (everybody go to juggluco solution or freethree)
- xdrip show wrong value for two problems : 5minutes instead 1minutes (solved into the latest nightly, see this Libre one minute testing · Issue #2680 · NightscoutFoundation/xDrip · GitHub) and smoothing alghoritm (not solved, you can disable but the value is not the same of juggluco/libre 3 app)

After this nightly, i see xdrip can also reading and upload 1 minutes value to Nightscout, every 1 minutes, no problem.

My question was if the latest nightly (url reference above) send 1 minutes value and update miband 6 every 1 minutes (i can't know if also watchdrip can be updated for display 1 minutes value like the latest xdrip nightly)

Hope i clear my question, and thank you very much for your help!

Wow, thanks for the update. For example to refer, my value at now is 156 l3 juggluco, xdrip 1 minutes 138

I have so many times, during sport, the my bloood glucose go down quiclky.

This morning i have alarm low 90, l3 juggluco, xdrip 1 minutes 126.

Now, you can confirm the miband show for example at 9.10 am 122, 9.11 am 128, 9.12 am 132 ?

If i understand correctly, your miband with the latest nightly of xdrip, can show 1 minute valute every 1 minute changing

Do you have a miband 6 for this test? Thanks

For me not, because i have libre3, with juggluco on phone is ok, every one minute, xdrip also with latest beta, show very different value when bg drop quicly etc. For safety, sport, etc was inusable xdrip.

I ask for watchdrip because maybe support juggluco or another method for display one-minutes value for libre 3.

Thanks for the reply, i think there not exist a valid solution for miband or amazfit at the moment, to support libre 3

Zitat von Joghurt_007

ich habe mich an die anleitung von watchdrip gehalten.

• Letzte patched App Mifit auf smarttphone installieren
• Account bei Mifit erstellen
• Band koppeln (authkey wird erstellt und an account gebunden)
• In den einstellungen die sichtbarkeit des bandes für andere geräte einstellen
• Patched app Mifit löschen
• neue Variante/Nachfolger von Mifit app ist „zepp life app“ aus google play store installieren und mit accountdaten von Mifit anmelden
• Watchdrip installieren, aktivieren, band wird automatisch gefunden
• Firmware update des bandes machen über Zepp life app

läuft bestens

Werden die Werte alle 1 Minute von Libre 3 auf dem Smartband unterstützt?

Wird der Wert auf dem Display alle 1 Minute aktualisiert?

Wie lange hält der Akku in diesem Modus?

Danke

Good morning Jka, is possible to implement an option to Floating Glucose, to automatic greencolor 75-180, yellowcolor 180-250, redcolor over 250 and under 75? Like to have a FloatingGlucoseColorVariable to a real glucose value.

Or, personal color to personal range value for hi-low-correct blood glucose mg/dl - mmol/l.

Glad to hear, bypass xdrip can unistall another app (i have on my phone LibreLink mod app for libreview + juggluco (dont'want to stop Active etc between LibreLink and juggluco for take control of sensore) + xdrip for nightscout m5stack home clock drive / Garmin edge mtb (value are totally wrong, because 5 minutes upload instead 1 minutes, and smooth algoritmi) + Glucodatahandler for send value every minutes with my WearOS Watch. For me take value from tasker o another method, and send to m5stack, Is very critical, i try to communicated between tasker phone and m5stack

For me is awesome, i have everyday problem with juggluco on my mountain, because there is no signal, and juggluco-tcp-ip configuration not show value or restart or many other problems, on wearos.

You app work great, same result immediately to the xdrip method over ble (but xdrip not support libre3 and one-minute values update, for this we use juggluco instead of xdrip)

Have you consider output support for nightscout? Juggluco don't have nightscout support, and we must to forward data to xdrip, and forward to nightscout system

Great work for an italian fan user!

Zitat von pachi81

Ho creato una nuova versione per le complicazioni di usura Juggluco.

Questo ora supporta anche le complicazioni IMAGE, in cui il valore è grande e visualizzato a colori:

[attach='19168','none','true'] [/allega]

Può essere scaricato qui: https://github.com/pachi81/GlucoDataHandler/releasesFo

Anyone try to program M5stack ESP32 or M5stickC/Plus to display values of Juggluco?

Zitat von jka

http://jkaltes.byethost16.com/Juggluco/mgdL/#mirror

Left middle menu->Mirror->Help, left middle menu->Mirror->Add Connection->Help

I know how to setup ip, but on external i have : my phone, with an hotspot connection - jelly2 miniphone with juggluco and 192.168.262.105 local ip; at home i have a phone of my mother with juggluco, but with local ip 192.168.1.104.

How i trasfer value between jelly2 connect hotspot external, and phone mother at home connect local network?

Thanks for suggest

How i can transfer on MIrror section of two juggluco, one on wifi home and one on my phone 4g outside?

With xdrip can sync information at distance, with juggluco how i can?

Thanks

Hi Jka, i also test you Kerfstock, works great on Edge1030+, i have sent a p.m. on garmin, with some questions to improve or testing builds.

Thanks man for the great work!

Zitat von jka

When you switch from Juggluco receiving glucose values from the Libre3 app to receiving glucose values directly from the sensor, you should reverse the mirror connection if you later want to use it that way again later. Otherwise you should remove the connection.

Freestyle Libre 3 sensors last only 14 days. 12 hours extra after 14 days applies only to Freestyle Libre 2 sensors.

Thank you, i misunderstood the extended 12hours for Libre3

Zitat von jka

Can't you send a logcat after the crash:

adb shell logcat -d > logcat.txt

Have you previously used the mirror function to receive data and maybe reinstalled it and reused the previous settings in the Libre3 app, without pressing "Resend Data"?

What version of Juggluco did you use?

If Juggluco did crash, how can you know that the sensor menu said, Sec_char_challenge_data?

Version 4.4.1
Juggluco crash and restart itself.
Yes for me all works with l3 app patched and juggluco.
Yesterday i have my old sensore end of time, then i try to take the control with juggluco (stop l3app mod, scan with juggluco nfc, it say "added sensor", scan second time nfc "Juggluco will retrieve value of this sensor.." and nothing.) for the 12 hours extendend after 14 days.

In the sensor tab, juggluco connect to the sensor, appear correctly the serial, dialog with the serial, but value not appear and say "Sec_char_challenge_data." in the field "Handshake"